Tag: battery

Showcase: Xantrex Freedom HF EMS – NEW GENERATION

Our supplier, Xantrex, is recognized as a world leader in the development and manufacturing of advanced power electronic products and systems for the mobile power market. Xantrex power solutions offers a wide selection of breakthrough technology with higher efficiency than traditional power conversion equipment. They recognize the dependency on electronic devices and appliances, along with the need for reliable mobile power solutions that enable their use anytime, anywhere.

Xantrex Freedom HF EMS – NEW GENERATION was deemed the Hot New Product at the 2017 EMS World Expo. This new ‘ambulance ready’ version of the Freedom HF series is one of the smallest, lightest, and most affordable inverters on the market. This charger was designed exclusively for a wide variety of electronics and appliances in emergency and specialty transport vehicles. The product is available in two models: the 1000W with a 55A multistage charger and the 1800W unit with a 40A charger.

With a new ignition lockout feature, the redefined Freedom HF EMS has the ability to minimize battery drain by disabling the inverter when the ignition is turned off. It is also equipped with a pre-attached 25’ extension cable for remote system monitoring. Additionally, the product design includes an auxiliary 12 Vdc power module, an automatic three-stage battery charger, and a built-in 30 amp relay to automatically transfer between inverter power and incoming AC utility power. 

The Freedom HF EMS Inverter/Charger has many protection features such as battery overvoltage and undervoltage protection, as well as over-temperature shutdown. It comes with automatic overload, short circuit, and ground fault protection. The charger is also compliant with KKK-A-1822 and is ETL certified to UL458 for use in mobile applications.

For more information and additional photos, visit http://www.xantrex.com/power-products/inverter-chargers/freedom-hf-ems.aspx. To install the Freedom HF EMS, contact us at 1-905-878-8457 or email info@leslieemergency.ca.

Showcase: Blue Sea Systems Automatic Timer Disconnect

Blue Sea Systems Automatic Timer Disconnect

Blue Sea Systems has designed over 1,000 electrical products that work collectively as a fully integrated system. As an ISO 9001:2008 certified company, product quality is managed to be consistent with international standards. Blue Sea Systems will replace or provide credit for any products found to be defective in material or manufacture. Our supplier stands behind their products for as long as they are owned.

The Automatic Timer Disconnect is a new battery-saving product with four ways to manage your batteries: timer disconnect, low voltage disconnect, automatic charging relay, or solenoid.

The timer disconnect function allows 12V signal triggers to relay battery power and connect to devices. Once the signal has stopped, the timer is activated and disconnects devices at a preset time. The timer ranges from 15 minutes to 4 hours in length.

The low voltage disconnect is programmed to automatically disconnect devices after sensing low battery voltage. This setting can also be used in conjunction with timer disconnect to preserve battery power by turning off devices prior to the preset time.

The automatic charging relay combines two batteries when charging and isolates them when discharging. The single side sensing design monitors the voltage of the start battery specifically. The automatic charging relay is ideal for auxiliary batteries that are AGM or significantly larger than the start battery.

The solenoid uses 12V signals to connect or disconnect relay without any time delay.

For more information and additional photos, visit https://www.bluesea.com/products/7615/ATD_Automatic_Timer_Disconnect. To install Blue Sea Systems’ Automatic Timer Disconnect, contact us at 1-905-878-8457 or info@leslieemergency.ca.